|
TESTING
You can test for a leaking shower liner
yourself! Here's how:
1. Remove the existing shower drain cover.
Usually they are fastened with 2 Phillips screws. Remember, lefty
loosely
(turn left, counter clockwise)
2. Stuff a large plastic garbage bag into
the drain pipe. You will remove this later, so leave a piece sticking up
to easily grab.
3. Fill the shower with water to within an inch
of the curb top and mark with a pencil the water line.
4. Wait 30 minutes and if the water level went
down, your liner is leaking.
The pressure of the water will force the water
out and if the water isn't going down the drain, it's finding it's way
out where the liner is damaged. Usually surrounding areas will become
wet. Many times this will create a stream of water.
5. Remove the plastic bag and replace the shower
drain cover.
6. Call Mr. Tile if in the Hendersonville/
Asheville area.
7.
Do it yourselfer?
I'll send you the materials needed to install an over liner for $119.00.
( for up to a 32" X 60" shower floor.)
Click
here for ordering details.
|
